Skip to content
Wholesale POD & laser engraving · Blind drop-ship from the USA
FomaPrint
5 min read

How to prepare artwork for laser engraving (SVG and DXF)

Most engraving problems are file problems. Here is how to avoid them.

Use vector files: SVG or DXF

A laser follows paths, so the cleanest results come from vector artwork. SVG and DXF keep every edge sharp at any size; a JPG or PNG has to be traced first, and tracing softens corners, loses thin details and invents bumps along curves.

Convert all text to outlines before exporting. A font that is installed on your computer may not exist on the production machine, and a missing font silently changes the design.

One colour, high contrast

Engraving is single-tone. Prepare artwork as solid black on a transparent background: black is what gets engraved, everything else is left alone. Remove gradients, drop shadows, glows and soft edges — they cannot be engraved, and the laser has to decide where they start and stop.

If a logo only exists in colour, redraw it as one-colour line art before sending it. That is a design decision, and it is better made by you than guessed in production.

Line thickness and small text

Thin lines are the most common cause of a disappointing result. Measured at the final engraved size, keep strokes at least about 0.4 mm thick. Hairline serifs, delicate script connectors and tiny ornaments that look fine on a screen can break up or disappear on a curved tumbler or textured leatherette.

Check the artwork at its real physical size, not zoomed in. If you have to squint at 100% on a ruler-scaled preview, it will be hard to read on the product.

  • Expand strokes into filled shapes so the thickness is fixed.
  • Keep the gaps between letters open — touching letters merge when engraved.
  • Avoid text smaller than the product can resolve; script fonts need more size than block fonts.

Size the design to the engraving area

Every product has a fixed engraving area. Design to that box rather than to the product photo, and leave a small margin from the edges. A design that is scaled down to fit an area it was not drawn for loses its thin details first.

Personalized fields — names, dates, initials — need room for the longest likely value. Test your layout with a long name, not just a short one.

Products for this guide

Engraved to order, no minimums, blind-shipped under your brand.

Common questions

Can I send a PNG or JPG for laser engraving?
It can be traced, but tracing loses detail and sharpness. A clean SVG or DXF with text converted to outlines gives a reliably better result.
Can a laser engrave a photo?
Only as a one-tone halftone, and the result depends heavily on the material. For a true colour photo, UV printing is the right process.
What does FomaPrint require?
High-contrast black vector artwork (SVG or DXF) on a transparent background, sized to the product's engraving area. Resellers receive the per-product spec sheet with their welcome pack.

Sell these under your own brand

No inventory, no minimum order and no FomaPrint branding in the box. Apply as a reseller and we send your wholesale pricing.

Questions this did not answer? Contact us

More guides

All guides